Belted vs. Non-Belted 1/5 Scale RC Tires: Which Is Best for High-Speed 12S Bashing?

Belted vs. Non-Belted 1/5 Scale RC Tires: Which Is Best for High-Speed 12S Bashing?

 If you run large-scale 1/5 RC vehicles on high-voltage brushless power—especially 8S or 12S setups hitting speeds over 100–160 km/h—you know the exact pain points that ruin a bashing session: tires expanding like giant pizza cutters (ballooning), foam inserts disintegrating and flying out, or tires ripping completely off the rims.


Choosing between belted and non-belted tires is the most critical decision you can make for your rig’s handling, durability, and safety. Here is how to choose the right setup for your Losi 5IVE-T 2.0, Losi DBXL-E, Kraken Vesla, or HPI Baja.


1. What Are Belted RC Tires and When Should You Run Them?

Belted tires feature a tough woven fiber or composite mesh layer integrated directly inside the rubber carcass. This internal belt prevents the tire from expanding radially under intense centrifugal force.

Key Advantages:

  • Zero Ballooning at Extreme Speeds: Even on 12S power, the tire maintains its true diameter and flat contact patch.
  • Unmatched High-Speed Stability: Your car tracks straight without oscillating or flipping at 100+ km/h.
  • Even Tread Wear: The tread contacts the road evenly across the entire width of the tire.

Best For: Paved roads, parking lots, packed dirt, and straight-line speed runs. If you want maximum tarmac grip and locked-in handling, belted wheel sets are the gold standard.


2. When Are Heavy-Duty Non-Belted Tires the Better Choice?

While belted tires excel on flat, high-traction surfaces, traditional off-road bashing on loose dirt, thick grass, gravel, and sand requires the tire carcass to conform slightly over bumps, rocks, and ruts to generate mechanical bite.

However, running standard non-belted tires on 12S usually results in blown beads and shattered foam. That is why heavy-duty reinforcement matters:

  • Stiff Rubber & Aggressive Pins: Deep pin treads need stiffer rubber compounds to resist folding under massive brushless torque.
  • High-Density Closed Foam Inserts: Cheap soft foams tear apart at 12S speeds. High-density molded foams stay intact and keep the tire seated.
  • Reinforced Dupont Nylon Rims & Thick Beadlocks: Heavy beadlock rings clamp the tire bead firmly so it cannot slip out during violent cornering.

Best For: All-terrain bashing, jumps, grass fields, and loose gravel. The MadMax V2 Super Hogs are specifically engineered with heavy-duty beads and high-density inserts to hold the rims securely even under 12S abuse.


3. Don't Overlook Wheel Hubs: The Importance of Extended Hexes

On large 1/5 rigs like the Losi 5IVE-T and DBXL-E, wide wheels often rub against inner steering turnbuckles or A-arms during hard compression. Upgrading to special extended alloy hub hexes provides extra clearance, widens your track width for better rollover resistance, and eliminates stripped plastic hexes.


Quick Decision Matrix

  • Pure Speed Runs & Asphalt: Choose Belted Onroad Tires.
  • Mixed Off-Road Bashing & Grass: Choose Stiff-Pin Non-Belted Beadlocks with High-Density Foam (like V2 Super Hogs).
  • Heavy Jumps & Mud/Sand: Choose Giant Grip or deep-lug tires paired with alloy extended hubs.

0 comments

Leave a comment

Please note, comments need to be approved before they are published.